Your Blind Spot Is the Strength You Use Everywhere
By Derek Neighbors on November 21, 2026
A head of engineering writes the clearest specs anyone at his company has seen. When the teams moved to agents, his specs got the best output in the building, so he started writing the spec for every team’s biggest work. For two quarters it looked like the best decision he had made, and nobody would have called it a blind spot. A year later the teams’ own specs are thin, nobody pushes back on how he frames a problem, and the agents are building from his picture of every system, including the ones he understands least. His review still says “great communicator,” and every word of it is true.
I have seen versions of this across a lot of engineering orgs. The leader is rarely taken down by the thing they are bad at. They know about that thing, their boss knows about it, and somebody on the team was hired to cover it. What gets them is the strength they now use everywhere. That strength is the blind spot, because it shows up in every situation, including the ones that needed the opposite.
Two Ways to Let a Team Down
A leader’s own habits can hurt a team in two ways. One is a weakness, something you do too little of, like follow-through or patience in a hard conversation. The other is a strength you do too much of, like decisiveness that leaves no call for anyone else to make, or clarity that leaves nothing for the team to work out.
From the outside the two look the same. The team slows down, the best people get quiet, and a few of them leave. Most leaders only look for the first kind, because every tool they grew up with was built to find it. Reviews, development plans, and 360 surveys all ask where you fall short. Almost none of them ask where you go too far.
| A weakness | An overused strength | |
|---|---|---|
| What it is | Something you do too little of | Something you do too much of |
| What people say about it | They name it in reviews and plans | They praise it |
| What the org does | Hires someone to cover it | Hires more people who share it |
| How you find out | Someone tells you | You have to go looking |
The Weakness You Already Know About
A weakness is loud. People tell you about it, sometimes in your review and sometimes by working around you in ways you can see. You put it on a development plan. You hire a deputy who is good at it. If you are bad at detail, someone on your staff becomes the detail person and the gap gets covered.
That is why, past a certain level, a weakness is rarely what blindsides a leader. By the time someone runs an org, their weaknesses have been named and staffed around for years. The leader who hates planning has a chief of staff, and the one who avoids conflict has a deputy who will have the hard conversation for them. The people around them already know where the gaps are and have built the org to fill them. None of that machinery points at the strength.
The Overused Strength Nobody Tells You About
In 2009 Robert Kaplan and Robert Kaiser published an article in the Harvard Business Review called “Stop Overdoing Your Strengths.” Their work with executives showed that strengths taken too far turn into liabilities, and that most leaders are lopsided. They sorted leader behavior into pairs, like forceful and enabling. Forceful means taking charge and pushing for results. Enabling means drawing people out and backing their calls. The more forceful a leader was, the less enabling they tended to be, and the reverse. Few leaders came up short on both. Most overplayed one side and starved the other. They later put the idea into a book with a blunt title, Fear Your Strengths.
An overused strength is hard to see for a few reasons, and they stack.
It gets praised. The decisive leader hears “you make things happen” for twenty years, and nobody writes “you make too many things happen” on a review.
It feels like who you are. A weakness feels like a gap you can work on, while a strength feels like your identity, so feedback against it lands as an attack.
The people closest to you share it. Leaders bring in people they work well with, and those people tend to admire the same things. A forceful leader’s inner circle is often forceful too, and they will not flag the problem because they have it.
The team goes quiet, and quiet reads as agreement. When a leader’s framing is always the strongest one in the room, people stop offering their own. I wrote about one version of this in what happens when the boss speaks first. From the head of the table, the silence looks like alignment.
Those reasons explain the blind spot, and they do not excuse it. Nobody on your team is obligated to tell you what you overdo. Finding it is your job, and the people around you pay for it every month you put it off.
This puts a limit on advice I still believe. In You’re Working Hard on the Wrong Things I argued for building on your strengths instead of grinding on your weaknesses. That holds for skills, and it stops holding once the strength becomes your answer to every situation, because then you are building on it in the places where it does damage.
The Real Difference: Too Much Looks Like the Virtue
Aristotle saw this pattern in the Nicomachean Ethics. He describes each virtue as a mesotes, a mean between two failures, one of too much and one of too little. Courage sits between cowardice and rashness. Generosity sits between stinginess and waste. The mean depends on the person and the situation rather than sitting at the halfway mark of a scale: the right amount, at the right time, toward the right people, for the right reason.
He also points out that the excess usually looks more like the virtue than the deficiency does. Next to a coward, the rash person looks brave, so people praise the rash person for courage. In a lot of companies the timid leader ends up on a development plan, and the rash one ends up with a bigger team.
For Aristotle the virtue is the mean itself, so courage can never be overdone. What gets overdone is the trait underneath it, like boldness, decisiveness, or clarity, and the excess borrows the virtue’s good name. Overused strengths work the same way. Too little of a good trait looks like a problem, and too much of it looks like more of the virtue. A leader who decides in every meeting looks decisive, and nobody sees someone who has taken every decision away from the team.
The Greeks paired the mean with sophrosyne, the virtue of knowing your own measure. The temple at Delphi carried the line “nothing in excess” for the same reason. You need that line most for the thing you are best at, because that is the thing you will never suspect you are overdoing. A strength exists to serve the work and the people in front of you. When you use it everywhere, it is serving your picture of yourself instead, and sophrosyne is the work of putting that back in order.
How to Find Your Blind Spot: Ask What You Do Too Much Of
Asking how you can improve will not surface an overused strength. That question pulls up weaknesses, because weaknesses are what people have been trained to name. Ask a sharper question, and ask people who have no reason to soften the answer.
1. Ask “What do I do too much of?” outside your inner circle. Go to a peer who runs a different team, the lead of a partner team that depends on your org, or someone who left your org in the last year. They have less riding on your mood than the people who report to you. You cannot make anyone answer honestly, but you control whether you ask, how you take the answer, and what you change afterward. Ask the exact question and then wait. If they say “nothing, really,” ask what they would tell a new person on your team to expect from you. The answer is usually your strength, described as a cost. Thank them and do not argue, because if you push back on the first honest answer, you will not get a second one.
2. Give the model your own decision trail. Pull a quarter of your record: the Slack threads where you made a call, your comments on design docs, the specs you wrote for the agents, the decisions log. Hand it to the model and ask what you do in nearly every situation whether or not the situation needed it. Ask where you take over and whose ideas get replaced by yours. Tell it you want the costs stated plainly and not softened. Models can flatter too, so the useful part is that the model has no stake in your career and nothing to lose by telling you. It may guess wrong about why you do it, but the pattern itself is sitting in your own messages. Deciding what to change is still your job.
3. Test the quiet. The next time a meeting agrees with you fast, ask for the strongest case against your framing, name the person you want to hear it from, and stop talking until they finish. If nobody can make the case, your framing may be right. If someone makes it easily, they had it the whole time and were not saying it.
4. Bend the stick the other way. Aristotle’s advice for finding the mean is to pull yourself toward the opposite extreme, the way you straighten a bent stick by bending it past straight. Pick one kind of decision for one quarter and underuse your strength on purpose. If you write every spec, let the team write theirs and point the agents at their version, even when you would have framed it better. If you decide fast, hold your opinion until two people have given theirs. It will feel like doing your job badly, and that feeling is how you know you were overdoing it.
5. Put someone unlike you on the hard calls. The next time you pull people into a hard decision, add one person who would handle it the opposite way: the careful one if you move fast, the blunt one if you smooth things over. Let their instinct shape the call while it is still open, since it is the strength your own habits keep out of the room.
Final Thoughts
Your weaknesses were found a long time ago. Other people named them, wrote them into reviews, and staffed around them. The trait to worry about is the one people thank you for, because it has spread into every room you walk into, including the rooms that needed the opposite. Aristotle said the excess passes for the virtue, which is why nobody stops you. Ask the people outside your circle what you do too much of, give the model your own record and read what it finds, and spend one quarter using less of your best trait on purpose. You keep the strength, and you gain the judgment to set it down when a moment needs something else, so that it serves the people in front of you instead of the leader you picture yourself to be.
Finding the strength you overuse goes faster around people outside your own circle who will say it plainly. That is what MasteryLab is for.
Frequently Asked Questions
What is an overused strength?
An overused strength is a trait that works so well a leader applies it everywhere, including situations that need the opposite. Robert Kaplan and Robert Kaiser described the pattern in a 2009 Harvard Business Review article, Stop Overdoing Your Strengths. They found most leaders are lopsided: the more forceful a leader is, for example, the less enabling they tend to be, and the reverse.
What does mesotes mean?
Mesotes is Aristotle’s word for the mean, the point between too much and too little where a virtue sits. Courage is the mean between cowardice and rashness. The mean is relative to the person and the situation rather than a fixed midpoint, and Aristotle noted that the excess often looks more like the virtue than the deficiency does.
How can a leader find their blind spots?
Ask people outside your inner circle one question: what do I do too much of? Peers, partner teams, and people who have left your team have less reason to soften the answer. You can also give a model a quarter of your own decisions, such as Slack threads, design-doc comments, and specs, and ask where you apply the same move no matter what the situation needed.